Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Exhaust Manifold Gasket

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine

See other generations:
Video tutorial

The gasket set for the exhaust manifold always includes the exhaust manifold gasket, which, due to the temperatures involved, is made of metallic material; in this model, it is divided into two separate elements, one for every two cylinders; before proceeding with the installation of the new gasket, ensure there are no dirt residues or deposits that could compromise the adhesion and thus the sealing of the gasket, both on the manifold side and the cylinder head side; once cleaned, insert the new gaskets aligning them with the dowel pins, apply the exhaust manifold, and tighten the corresponding nuts.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Peugeot Partner Tepee (2008-2018 / B9) Before applying the new gasket, it is essential to clean its seating, both on the cylinder head side and the manifold side: remove any dirt and depos…
Replacement of Rocker Cover Gasket
Replacement of Rocker Cover Gasket
Peugeot Partner Tepee (2008-2018 / B9) Before applying the new gasket, thoroughly clean its seating, both on the cylinder head side and under the rocker cover, to remove any dirt and crust…
Replacement of the Cylinder Head Gasket
Replacement of the Cylinder Head Gasket
Peugeot Partner Tepee (2008-2018 / B9) If you need to replace the cylinder head gasket, it is advisable to have it skimmed by a machinist to eliminate any deformations; after skimming, che…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos