Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rocker Cover Gasket

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Engine

Before applying the new gasket, thoroughly clean its seating, both on the cylinder head side and under the rocker cover, to remove any dirt and crust that could compromise the adhesion and thus the sealing of the gasket. Once the cleaning phase is complete, place the new gasket in the groove along the edges of the cover, position the cover onto the cylinder head, and tighten the respective fixing pins with a torque wrench in a cross pattern (there is no need to apply gasket sealant unless there are signs of wear).

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Peugeot Partner Tepee (2008-2018 / B9) Before applying the new gasket, it is essential to clean its seating, both on the cylinder head side and the manifold side: remove any dirt and depos…
Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Peugeot Partner Tepee (2008-2018 / B9) The gasket set for the exhaust manifold always includes the exhaust manifold gasket, which, due to the temperatures involved, is made of metallic mat…
Replacement of the Cylinder Head Gasket
Replacement of the Cylinder Head Gasket
Peugeot Partner Tepee (2008-2018 / B9) If you need to replace the cylinder head gasket, it is advisable to have it skimmed by a machinist to eliminate any deformations; after skimming, che…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos