Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Peugeot Partner Van?

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the tyre warning light on a Peugeot Partner van, a very simple and quick operation to perform only after restoring the correct pressure in each tyre according to the instructions in the manual. First, go inside the cabin, then insert the key and turn on the ignition.

Next, navigate to the general menu on the central display, enter "Personalisation-Configuration", "Define Vehicle Parameters", "Safety", "Tyre Inflation", and confirm the reset. Finally, restart the ignition to complete the procedure.


Posted on 14 September 2026 by ScegliAuto


Related tutorials

How to reset the service light on the 2014 Peugeot Partner
How to reset the service light on the 2014 Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) If you have a 2014 Peugeot Partner and are wondering how to perform the manual reset procedure for the service light, then all you need to do is foll…
How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
How do you replace the license plate light of the Peugeot Partner Tepee?
How do you replace the license plate light of the Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The video tutorial attached here is of a general nature, meaning it is relevant to various Peugeot vehicles, including the Peugeot Partner Tepee. Let…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos