Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Intake Manifold Gasket

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Engine

Before applying the new gasket, it is essential to clean its seating, both on the cylinder head side and the manifold side: remove any dirt and deposits that could compromise the adhesion and therefore the sealing of the gasket, affecting the engine's performance. Once the cleaning phase is complete, insert the new gasket (divided into three pieces) aligning the holes with the dowel pins, apply the manifold, and tighten the fixing nuts in a cross pattern using a torque wrench (it is not necessary to apply gasket sealant).

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Peugeot Partner?
How do you replace the rear headlight bulb of the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The replacement of the rear headlight bulb of the Peugeot Partner is done by opening the rear tailgate of the vehicle, so that it is possible to acce…
Replacing Front Bulbs on a Peugeot Partner
Replacing Front Bulbs on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Working with the engine off and the handbrake engaged, lift the bonnet and insert the support rod. The video shows you how to replace each bulb in th…
Replacement of Air Conditioning Filter
Replacement of Air Conditioning Filter
Peugeot Partner Tepee (2008-2018 / B9) An important element for your health is the air recirculation filter for the air conditioning in your cabin. Don't worry, it's a simple and quick rep…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos