Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Camshaft Oil Seal

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine

See other generations:
Video tutorial

To replace the camshaft oil seal, you must first remove the timing belt and the associated toothed pulley; once you reach the oil seal's location, extract the old one taking care not to damage the seating, clean it thoroughly, and insert the new oil seal, lubricating it generously and ensuring it is fully seated (use the appropriate tool to push it in). At this point, proceed with mounting the toothed pulley, correctly tightening the fixing pin: it is recommended to avoid using a pneumatic screwdriver.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

When Should the Timing Belt Be Changed on a Peugeot Partner?
When Should the Timing Belt Be Changed on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To drive the camshaft at half speed and in perfect sync with the crankshaft, a transmission is required, which can be achieved in various ways: the t…
Replacing Front Bulbs on a Peugeot Partner
Replacing Front Bulbs on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Working with the engine off and the handbrake engaged, lift the bonnet and insert the support rod. The video shows you how to replace each bulb in th…
How to replace the cabin air filter of the 2019 Peugeot Partner
How to replace the cabin air filter of the 2019 Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) Below we will discover together the steps you need to follow in order to correctly replace the cabin air filter in your Peugeot Partner Mk3 (2019). F…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos