Do it yourself
Frequently asked questions about cars and motorcycles

When Should the Timing Belt Be Changed on a Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
Video tutorial

To drive the camshaft at half speed and in perfect sync with the crankshaft, a transmission is required, which can be achieved in various ways: the two most common in car engines are with a chain and with a toothed belt. The former is usually maintenance-free, while the latter may require replacement after a certain mileage (from 37,000 miles upwards) or a certain period (from three to ten years), whichever comes first.

This is because the rubber that makes up the belt's casing and teeth tends to wear out over the years and with mileage. On this model of vehicle, replacement is recommended between 74,000 miles and 112,000 miles.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, learn how to replace the timing belt on a Peugeot Partner 1.6. Before starting, open the front bonnet of your Peugeot Partner. Begi…
Peugeot Partner Tepee (2008-2018 / B9) Before starting, open the front bonnet of your Peugeot Partner. Begin by loosening the timing chain pulley and the tensioner. Once done, unscrew and …
Peugeot Partner Tepee (1996-2013 / MK 1) Today's guide will provide useful information on how to remove and replace the timing belt on the Peugeot Partner Tepee 1.6 HDI. For this type of eng…

Other guides you may be interested in

How to Replace the Rear Light Bulb on a Citroen C5

To replace the rear light bulb on a 2015 Citroën C5, open the boot of the vehicle and remove the side carpet to access the inside of the light unit. Disconnect the light connector and remove the screw. Take out the light unit and proceed to replace the stop light bulb. Open the light housing and replace the bulb. Follow the same procedure for the right rear light bulb. Once the replacement is complete, refit the light unit, reconnect the connector, and close the side carpet. If the bulb does not work correctly, check the fuse related to the light before replacing it again.

Watch the video!


by ScegliAuto

More videos