Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. Partner Tepee
  6. : Timing belt

Peugeot Partner Tepee - Timing belt

Peugeot Partner Tepee (2008-2018 / B9)
Replacement of the timing belt of the Peugeot Partner Tepee - Citroen Verlingo 1.6 HDi

Today's information will show us how to disassemble and replace the timing belt of the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. First, …read all…
Posted on 18 February 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How do you replace the timing belt of the Peugeot Partner?

In order to replace the timing belt of the Peugeot Partner, you need to loosen the screws that secure the right front wheel, also removing the corresponding …read all…
Posted on 2 February 2024 by ScegliAuto
Peugeot Partner Tepee (1996-2013 / MK 1)
How and when to replace the timing belt of the Peugeot Partner Tepee 1.6 HDI.

Today's guide will show us useful information for disassembling and replacing the timing belt of the Peugeot Partner Tepee 1.6 HDI. On this type of engine, the …read all…
Posted on 1 May 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
When should the timing belt be changed on the Peugeot Partner

To operate the camshaft at half speed and in perfect synchrony with the crankshaft you need a transmission that can be made in various ways: the two most …read all…
Posted on 13 June 2022 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the timing belt on a Peugeot Partner 1., 6 HDI

In this tutorial we see how to replace the timing belt on Peugeot Partner 1.6. Before starting, we will have to go to open the front hood of our Peugeot …read all…
Posted on 29 May 2022 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How do you remove the Peugeot Partner's timing belt?

To be able to remove the Peugeot Partner's timing belt, you must first remove the wheel and the relative wheel arch on the passenger side. Once removed, it …read all…
Posted on 24 February 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the timing belt of a Peugeot Partner

Before starting, we will have to go to open the front hood of our Peugeot Partner. So let's start by loosening the timing chain pulley and the related belt …read all…
Posted on 12 January 2024 by ScegliAuto

Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos