Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt of the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Timing belt

To replace the timing belt of the Peugeot Partner, loosen the screws that secure the right front wheel, also removing the corresponding wheel arch liner: once this liner has been removed, proceed to loosen the central nut that secures the tensioner pulley, reducing the tension of the timing belt. At this point, you can fit the new replacement part around the pulleys, restoring tension with the installation of the pulley; finally, check that everything functions correctly.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, learn how to replace the timing belt on a Peugeot Partner 1.6. Before starting, open the front bonnet of your Peugeot Partner. Begi…
How to Replace the Timing Belt on a Peugeot Partner
How to Replace the Timing Belt on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before starting, open the front bonnet of your Peugeot Partner. Begin by loosening the timing chain pulley and the tensioner. Once done, unscrew and …
How to replace the water pump of the Peugeot Partner Tepee 1.4
How to replace the water pump of the Peugeot Partner Tepee 1.4
Peugeot Partner Tepee (1996-2013 / MK 1) Below we will see the main steps useful for disassembling and replacing the water pump and timing belt of the Peugeot Partner 1.4. First, lift the ve…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos