Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator on a Peugeot Partner?

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Alternator

See other generations:
Video tutorial

To replace the alternator on a Peugeot Partner, open the bonnet to access the components inside the engine compartment: you will need to loosen the screws securing the intake hose, disconnecting and completely removing it. Underneath it, on the left side of the engine block, you will find the alternator: this must be freed from the relevant auxiliary belt, and you can proceed by loosening the securing screws and disconnecting the connectors.

This will allow you to insert the new spare part, securing and connecting it properly.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to Remove the Alternator Belt from a Peugeot Partner Tepee
How to Remove the Alternator Belt from a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Today, you will learn how to remove the alternator belt from a Peugeot Partner Tepee. The procedure takes about 30 minutes. To perform this simple op…
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, learn how to replace the timing belt on a Peugeot Partner 1.6. Before starting, open the front bonnet of your Peugeot Partner. Begi…
How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos