Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : How to replace the timing belt on a Peugeot Partner 1., 6 HDI

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Timing belt
Operation: How to replace the timing belt on a Peugeot Partner 1., 6 HDI

In this tutorial we see how to replace the timing belt on Peugeot Partner 1.6. Before starting, we will have to go to open the front hood of our Peugeot Partner. Let's start by loosening the timing chain pulley and the relative belt tensioner. Once this is done, we will have to unscrew and remove the bolt that secures the bracket that holds the timing belt in place, and then remove the bracket itself. When we have completed this step, we will be able to remove the timing belt, and we will have finished the disassembly. To fit the new timing belt and close everything, we will simply have to follow this procedure in reverse, and the replacement will be completed.


Posted on 29 May 2022 by ScegliAuto

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - When to replace the timing belt on a Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - What is the price of replacing the Peugeot Partner toothed belt? Read Answer
    • Partner Tepee 2008-2018 - How many km does the Peugeot Partner timing belt need to be replaced? Read Answer
    • Partner Tepee 2008-2018 - How many km do you need to change the Peugeot Partner's timing belt? Read Answer
    • Partner Tepee 2008-2018 - How many kilometers do you change the Peugeot Partner's timing belt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos