Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : Replacement of the timing belt of the Peugeot Partner Tepee - Citroen Verlingo 1.6 HDi

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Timing belt
Operation: Replacement of the timing belt of the Peugeot Partner Tepee - Citroen Verlingo 1.6 HDi

Today's information will show us how to disassemble and replace the timing belt of the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. First, we open the hood of the car and start disassembling and removing the engine support, unscrewing the fixing screws; then we lift the car and remove the front right wheel, removing the wheel arch and the crankshaft pulley (disconnecting the serpentine belt first), as shown in the video. At this point, we remove the distribution cover and replace the belt with the new one, following the video tutorial until the end!


Posted on 18 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - When to replace the timing belt on a Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - What is the price of replacing the Peugeot Partner toothed belt? Read Answer
    • Partner Tepee 2008-2018 - How many km does the Peugeot Partner timing belt need to be replaced? Read Answer
    • Partner Tepee 2008-2018 - How many km do you need to change the Peugeot Partner's timing belt? Read Answer
    • Partner Tepee 2008-2018 - How many kilometers do you change the Peugeot Partner's timing belt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos