Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Engine Mount on the Peugeot Partner 1.6 HDI

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Engine mount

In today's video tutorial, you will see how to remove and replace the front engine mount on the first series Peugeot Partner with a 1.6 HDI engine. First, open the bonnet and start by removing the brake fluid reservoir; then unscrew the bracket found on the top by loosening the fixing screws with a socket spanner. At this point, lift the vehicle and also raise the engine using a jack with a soft support base; then unscrew the mounting bolts of the engine mount to remove it and replace it with the new one, as shown in the video!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the thermostat for the Peugeot Partner Tepee 1.6 HDi
Replacement of the thermostat for the Peugeot Partner Tepee 1.6 HDi
Peugeot Partner Tepee (1996-2013 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the thermostat of the engine cooling circuit of the Peugeot…
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Peugeot Partner Tepee (2008-2018 / B9) Today's information will show you how to remove and replace the timing belt on the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. Fi…
How to Dismantle the Turbocharger on a Peugeot Partner Tepee 1.6 HDI
How to Dismantle the Turbocharger on a Peugeot Partner Tepee 1.6 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) In today's tutorial, you will learn how to dismantle the turbocharger on a Peugeot Partner Tepee with a 1.6 HDI engine. First, open the bonnet and di…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos