Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and When to Replace the Timing Belt on the Peugeot Partner Tepee 1.6 HDI

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Timing belt

Today's guide will provide useful information on how to remove and replace the timing belt on the Peugeot Partner Tepee 1.6 HDI. For this type of engine, the manufacturer recommends replacing the belt every 10 years or 109,000 miles. First, open the bonnet and start removing the engine mount; raise the vehicle and remove the front right wheel, then take off the wheel arch liner, as shown in the video. At this point, disconnect the serpentine belt and remove the crankshaft pulley; remove the timing cover to access the belt, taking the necessary references for replacement and timing.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, learn how to replace the timing belt on a Peugeot Partner 1.6. Before starting, open the front bonnet of your Peugeot Partner. Begi…
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Peugeot Partner Tepee (2008-2018 / B9) Today's information will show you how to remove and replace the timing belt on the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. Fi…
Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) This guide shows you the main steps to remove and replace the clutch cable on the Peugeot Partner Tepee 2.0 HDI. First, raise the vehicle and disconn…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos