Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump of the Peugeot Partner Tepee 1.4

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Pump

Below we will see the main steps useful for disassembling and replacing the water pump and timing belt of the Peugeot Partner 1.4. First, lift the vehicle and start by removing the V-belt and the crankshaft pulley, loosening the tensioner and unscrewing the central bolt; then remove the engine support and the distribution cover, as shown in the video. At this point, disconnect the timing belt and unscrew the water pump screws, letting the fluid drain into a container; then, once the timing belt and water pump kit have been replaced, reassemble everything!

Posted on 25 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) This guide shows you the main steps to remove and replace the clutch cable on the Peugeot Partner Tepee 2.0 HDI. First, raise the vehicle and disconn…
How to Replace the Alternator on a Peugeot Partner?
How to Replace the Alternator on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To replace the alternator on a Peugeot Partner, open the bonnet to access the components inside the engine compartment: you will need to loosen the s…
How to Replace the Battery on a Peugeot Partner Tepee
How to Replace the Battery on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this video tutorial, learn how to replace the battery on a Peugeot Partner Tepee. Start by opening the bonnet and immediately disconnect the negat…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos