Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Peugeot Partner.

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Headlight bulb

Today we will explain how to replace the headlight bulb of the Peugeot Partner. To carry out the replacement, it is necessary to remove the water pump reservoir. We open the front hood and using a wrench, we unscrew the bolt that secures the pump pin, then we remove the pump. We open the cover of the ceiling light and remove the bulb after disconnecting the connector. We insert the new bulb and connect the connector to close the ceiling light cover. We reassemble the water pump and the hose, and then close the front hood. If the bulb does not work, we replace the fuse.

Posted on 8 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Peugeot Partner 3
How to replace the headlight bulb of the Peugeot Partner 3
Peugeot Partner Tepee (2018-2026 / MK 3) If one of the bulbs inside the front headlight of your Peugeot Partner Mk3 has suddenly stopped working and you want to find out how to replace it co…
How to Replace the Headlight Bulb on a 2020 Peugeot Partner
How to Replace the Headlight Bulb on a 2020 Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) The attached video tutorial applies not only to the 2020 Peugeot Partner but also to the Citroen Berlingo, as the same method is used to replace the …
Replacing the Headlight Bulb on the 2019 Peugeot Partner
Replacing the Headlight Bulb on the 2019 Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) If the position light bulb on your Peugeot Partner burns out, you need to replace it as soon as possible. To change it, open the bonnet and secure it…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos