Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the headlight bulb of the Peugeot Partner 2007

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Headlight bulb

If one of the bulbs in the front headlight of your Peugeot Partner (2007) has stopped working and you want to replace it with a new one, all you have to do is follow the steps described in this new guide dedicated to you. First, lift the front hood of the vehicle completely and make sure the engine is not hot. Once you have done this, locate the protective cap located in the rear area of the headlight and remove it with your own hands. Then, also remove the bulb holder and replace the broken bulb with a new one. Finally, reassemble everything and close the hood.

Posted on 3 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Partner Tepee (2018-2026 / MK 3) Let's see how to replace the bulb of one of the headlights in the 2020 Peugeot Partner. In particular, we will see how to change the lamp of the rear…
Peugeot Partner Tepee (2018-2026 / MK 3) If one of the bulbs inside the front headlight of your Peugeot Partner Mk3 has suddenly stopped working and you want to find out how to replace it co…
Peugeot Partner Tepee (2008-2018 / B9) Today we will explain how to replace the headlight bulb of the Peugeot Partner. To carry out the replacement, it is necessary to remove the water pum…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos