Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on the Peugeot Partner Van?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the headlight bulbs on the Peugeot Partner van, a very simple and quick operation. First, ensure that the instrument panel is off for safety, then open the bonnet, locate the large cap at the rear of the headlight in question, and unscrew it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing.

At this point, simply insert the replacement bulb and reassemble everything by following the reverse procedure.


Posted on 23 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light in a Peugeot Partner Van?
How to Reset the Service Light in a Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) As seen in this tutorial, resetting the service light in a Peugeot Partner van is a very simple and quick operation. Before proceeding, ensure that a…
How to reset the service in the Peugeot Partner van?
How to reset the service in the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, we can see how to reset the service in the Peugeot Partner van, an extremely simple and quick operation to be carried out only afte…
How to reset the service on a Peugeot Partner van?
How to reset the service on a Peugeot Partner van?
Peugeot Partner Tepee (2018-2026 / MK 3) In this tutorial, you will see how to reset the service on a Peugeot Partner van, an extremely simple and quick operation to perform only after compl…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos