Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Peugeot Partner Tepee

Model: Peugeot Partner Tepee MK 3 - Years 2018-2026
Part: Headlight bulb

In this video tutorial, you can observe the steps to replace the headlight bulb on a Peugeot Partner Tepee. Get inside the vehicle, pull the lever near the driver’s side pedal, which will allow you to unclip the bonnet. Lift the bonnet and secure it with the appropriate rod; locate the back of the headlight and remove the rubber/plastic cap by pulling it towards you. Disconnect the connector attached to the bulb and unclip the metal spring holding it in place; then extract the old bulb and proceed to replace it by inserting the new bulb in the same orientation as the original. Reclip the spring and reconnect the connector.

Posted on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Peugeot Partner Tepee
Replacement of the front headlight bulb of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) This brief guide will show us the information that will allow us to disassemble and replace the headlight bulb of the Peugeot Partner Tepee. First, w…
How to replace the third brake light bulb of the Peugeot Partner
How to replace the third brake light bulb of the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Today we will explain how to replace the third stop light bulb of the Peugeot Partner Tepee independently. Let's start by opening the left rear door …
How to replace the headlight bulb of the Peugeot Partner 3
How to replace the headlight bulb of the Peugeot Partner 3
Peugeot Partner Tepee (2018-2026 / MK 3) If one of the bulbs inside the front headlight of your Peugeot Partner Mk3 has suddenly stopped working and you want to find out how to replace it co…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos