Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Headlight

Below are the instructions that will allow us to remove and replace the front headlight of the Peugeot Partner Tepee. First, open the bonnet of the vehicle and start unscrewing the upper fastening screws of the front headlight and the bumper; unscrew the screws located on the front wheel arch to gently detach the bumper at the sides, thus accessing the lower screw of the headlight assembly, as shown in the video. At this point, disconnect the electrical connector of the front headlight, removing it and replacing it with the new one; check the operation of the lights, finally reassembling the bumper.

Posted on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Peugeot Partner 3
How to replace the headlight bulb of the Peugeot Partner 3
Peugeot Partner Tepee (2018-2026 / MK 3) If one of the bulbs inside the front headlight of your Peugeot Partner Mk3 has suddenly stopped working and you want to find out how to replace it co…
How to Replace the Headlight Bulb on a 2020 Peugeot Partner
How to Replace the Headlight Bulb on a 2020 Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) The attached video tutorial applies not only to the 2020 Peugeot Partner but also to the Citroen Berlingo, as the same method is used to replace the …
How to replace the headlight bulb of the Peugeot Partner.
How to replace the headlight bulb of the Peugeot Partner.
Peugeot Partner Tepee (2008-2018 / B9) Today we will explain how to replace the headlight bulb of the Peugeot Partner. To carry out the replacement, it is necessary to remove the water pum…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos