Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

This brief guide will show us the information that will allow us to disassemble and replace the headlight bulb of the Peugeot Partner Tepee. First, we open the hood of the car and start removing the plastic cap protecting the bulbs found behind the headlight assembly; then we disconnect the electrical connector to remove the low beam bulb, releasing the metal clip, as shown in the video.

At this point, we install the new low beam bulb, of the correct type (in this case, H4 type); insert it in the correct direction and finally secure the plastic cap!


Posted on 16 July 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on the Peugeot Partner?
How to Replace the Rear Light Bulb on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on the Peugeot Partner, open the rear tailgate to access the corresponding light unit. Loosen the screws next to the l…
How do you replace the headlight bulb of the Peugeot Partner?
How do you replace the headlight bulb of the Peugeot Partner?
Peugeot Partner Tepee (1996-2013 / MK 1) Replacing the front headlight bulb of the Peugeot Partner does not require technical experience, the use of specific equipment, or even much time. It…
How to Replace the Front Light Bulb of the Peugeot Partner Mk3
How to Replace the Front Light Bulb of the Peugeot Partner Mk3
Peugeot Partner Tepee (2018-2026 / MK 3) If one of the bulbs in the front light of your Peugeot Partner Mk3 has suddenly stopped working and you want to know how to replace it correctly, fol…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos