Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the Peugeot Partner?

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Headlight bulb

Replacing the front headlight bulb of the Peugeot Partner does not require technical experience, the use of specific equipment, or even much time. It is a job within everyone's reach, if you want to do it yourself. The headlight can be seen in the video available to us, and if we look closely, in the rear part there is the bulb holder to be extracted, from which the bulb to be replaced comes out. The aforementioned bulb holder is covered by a plastic inspection cap, which must be removed. After that, simply install the replacement bulb, reassemble everything, and test the ignition for safety.

Posted on 24 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Peugeot Partner?
How to Replace the Headlight Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the headlight bulb on a Peugeot Partner, open the bonnet to access the circular cap at the rear of the headlamp. Once the cap is removed, …
How do you replace the headlight bulb in a 2020 Peugeot Partner?
How do you replace the headlight bulb in a 2020 Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) Let's see how to replace the bulb of one of the headlights in the 2020 Peugeot Partner. In particular, we will see how to change the lamp of the rear…
How to Replace the Headlight Bulb on a Peugeot Partner Tepee
How to Replace the Headlight Bulb on a Peugeot Partner Tepee
Peugeot Partner Tepee (2018-2026 / MK 3) In this video tutorial, you can observe the steps to replace the headlight bulb on a Peugeot Partner Tepee. Get inside the vehicle, pull the lever ne…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos