Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

To replace the headlight bulb on a Peugeot Partner, open the bonnet to access the circular cap at the rear of the headlamp. Once the cap is removed, pull down a clip connected to a spring, which will allow you to extract the old bulb from its housing after disconnecting the relevant connector.

You can then insert the new bulb into the housing and lift the clip connected to the spring to secure it. Next, reconnect the connector and close everything with the protective cap.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot Partner?
How to Replace the Rear Light Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on a Peugeot Partner, open the tailgate. Unscrew the screws that secure the light unit within its housing and disconne…
How to Replace the Rear Light Bulb on the Peugeot Partner?
How to Replace the Rear Light Bulb on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on the Peugeot Partner, open the rear tailgate to access the corresponding light unit. Loosen the screws next to the l…
How to Replace the Number Plate Bulb on a Peugeot Partner
How to Replace the Number Plate Bulb on a Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) To replace the number plate bulb on a Peugeot Partner, open the rear tailgate and loosen all the screws securing the internal panel cover. Once the s…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos