Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Peugeot Partner Tepee - Light bulb

Peugeot Partner Tepee (1996-2013 / MK 1)
How to change the light bulbs in a 2010 Peugeot Partner?
Let's see together with the author of this video how to change the front headlight bulbs of the 2010 Peugeot Partner. First, we need to lift the front hatch, …read all…
Posted on 12 August 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to change front bulbs on Peugeot Partner 2
We open the engine compartment by lifting the front hood (after releasing it from the special lever located inside the passenger compartment) and securing it. …read all…
Posted on 27 November 2022 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How do i replace the headlight bulb on a Peugeot Partner?
To replace the headlight bulb of a Peugeot Partner, you need to open the hood, in order to remove the circular cap located at the rear of the headlight. Once …read all…
Posted on 24 February 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the Peugeot Partner Tepee license plate bulb
Through this simple and short repair it will be possible to avoid all the problems deriving from the respect of the rules of the road code, to make the change …read all…
Posted on 2 October 2023 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos