Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the headlight bulb of a Peugeot Partner

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Light bulb

See other generations:
Video tutorial

In this video we can see how simple it is to change the headlight bulb of a Peugeot Partner: opening the front hood, we see that we have ample space to put our hands behind the optical group, and therefore remove the rubber cap behind the bulbs. Once removed, we find the electrical connector that we must disconnect, and then a metal safety spring to open.

Now we can remove the bulb with its socket; remove the faulty bulb and replace it with a new one, being careful not to touch the bulb with bare hands. Put it back in place, close the spring, reattach the connector, put the rubber cap back on and the job is done.


Posted on 2 June 2025 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Peugeot Partner?
How to reset the "Service" light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To reset the "Service" light on a Peugeot Partner, turn on the instrument panel without starting the engine by turning the key in the ignition to the…
How to Replace the Headlight Bulb on a Peugeot Partner Tepee
How to Replace the Headlight Bulb on a Peugeot Partner Tepee
Peugeot Partner Tepee (2018-2026 / MK 3) In this video tutorial, you can observe the steps to replace the headlight bulb on a Peugeot Partner Tepee. Get inside the vehicle, pull the lever ne…
How to Replace a Bulb in the Rear Light of a 2020 Peugeot Partner?
How to Replace a Bulb in the Rear Light of a 2020 Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) Let's see how to replace a bulb in one of the rear lights of the 2020 Peugeot Partner. Specifically, we will change the bulb in the rear light by fol…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos