Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Peugeot Partner?

Model: Peugeot Partner Tepee MK 3 - Years 2018-2026
Part: Service warning light

To reset the "Service" light on a Peugeot Partner, turn on the instrument panel without starting the engine by turning the key in the ignition to the first position. Find the button located under the instrument panel and hold it down. While continuing to hold it down, turn the key to the ignition position. A countdown or maintenance message will appear on the display. Continue to hold down the button until the message disappears or the reset is confirmed. Once the operation is complete, turn off and on the instrument panel to verify that the "Service" light has been removed.

Posted on 10 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Peugeot Partner?
How to reset the "Service" light on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To reset the "Service" light on a Peugeot Partner, start with the ignition off. Press and hold the button located under the instrument panel, near th…
How to Reset the Service Light in a Peugeot Partner 3
How to Reset the Service Light in a Peugeot Partner 3
Peugeot Partner Tepee (2018-2026 / MK 3) Here’s how to reset the service light in a Peugeot Partner 3 after performing the scheduled maintenance. Start with the vehicle completely off. Locat…
How to Reset the Service Light on a Peugeot Partner Tepee
How to Reset the Service Light on a Peugeot Partner Tepee
Peugeot Partner Tepee (1996-2013 / MK 1) To reset the service light on a Peugeot Partner Tepee, turn off the dashboard and remove the key. At this point, press and hold the button used to re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos