Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Peugeot Partner Tepee - Engine

Peugeot Partner Tepee (2008-2018 / B9)
Replacement exhaust manifold gasket
In the emery series gasket set there is always the exhaust manifold gasket which, given the temperatures involved, is made of metal; in this model it is …read all…
Posted on 15 August 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Intake manifold gasket replacement
Before applying the new gasket, it is absolutely essential to clean its seat, both on the head side and on the manifold side: any residual dirt and …read all…
Posted on 10 August 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Replacing the tappet cover gasket
Before applying the new gasket, carefully clean its seat, both on the cylinder head side and under the tappet cover, in order to eliminate any residual dirt …read all…
Posted on 10 August 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Head gasket replacement
If the cylinder head gasket has to be replaced, it is advisable to have it flattened by a grinder to eliminate any deformations; after flattening, check the …read all…
Posted on 6 August 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Replacement of cylinder head fixing pins
When regenerating the cylinder head it is good practice to use a new kit of pins for fixing it; start by reworking the threads of the fixing holes using a tap …read all…
Posted on 6 August 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Camshaft oil seal replacement
In order to replace the camshaft oil seal it is necessary to remove the timing belt and the relative toothed pulley; once the oil seal seat is reached, remove …read all…
Posted on 6 August 2023 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos