Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cylinder Head Fixing Bolts

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine

See other generations:
Video tutorial

When refurbishing the cylinder head, it is good practice to use a new set of fixing bolts. Start by cleaning the threads of the fixing holes using a tap with the appropriate diameter and pitch.

During this phase, ensure that no debris falls into the cylinders. Then, apply copper grease to the bottom of the threads and under the heads of the bolts.

Position the cylinder head and then the bolts, which should be tightened in a cross pattern using a torque wrench and a graduated tool to ensure correct locking.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacement of the Cylinder Head Gasket
Replacement of the Cylinder Head Gasket
Peugeot Partner Tepee (2008-2018 / B9) If you need to replace the cylinder head gasket, it is advisable to have it skimmed by a machinist to eliminate any deformations; after skimming, che…
Replacement of Rocker Cover Gasket
Replacement of Rocker Cover Gasket
Peugeot Partner Tepee (2008-2018 / B9) Before applying the new gasket, thoroughly clean its seating, both on the cylinder head side and under the rocker cover, to remove any dirt and crust…
Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Peugeot Partner Tepee (2008-2018 / B9) Before applying the new gasket, it is essential to clean its seating, both on the cylinder head side and the manifold side: remove any dirt and depos…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos