Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Cylinder Head Gasket

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine

See other generations:
Video tutorial

If you need to replace the cylinder head gasket, it is advisable to have it skimmed by a machinist to eliminate any deformations; after skimming, check the flatness of the surface using a straight edge and a feeler gauge; repeat the same check on the cylinder block, also checking the piston protrusion with a digital depth gauge; clean the threads of the head fixing holes with a tap, ensuring that no debris enters the cylinders; at this point, apply the new cylinder head gasket, position the head, and use a new set of bolts to secure it (cross-tightening pattern with a calibrated torque wrench).


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacement of Rocker Cover Gasket
Replacement of Rocker Cover Gasket
Peugeot Partner Tepee (2008-2018 / B9) Before applying the new gasket, thoroughly clean its seating, both on the cylinder head side and under the rocker cover, to remove any dirt and crust…
Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Peugeot Partner Tepee (2008-2018 / B9) Before applying the new gasket, it is essential to clean its seating, both on the cylinder head side and the manifold side: remove any dirt and depos…
Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Peugeot Partner Tepee (2008-2018 / B9) The gasket set for the exhaust manifold always includes the exhaust manifold gasket, which, due to the temperatures involved, is made of metallic mat…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos