Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Peugeot Partner Tepee - Seat

Peugeot Partner Tepee (2008-2018 / B9)
How to lower the rear seats of the Peugeot Partner Tepee.
Below we will see the instructions that will allow us to lower and remove the rear seats of the Peugeot Partner Tepee, in simple and quick steps. First, we …read all…
Posted on 6 June 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How do i remove the rear seats of the Peugeot Partner?
In order to remove the rear seats of the Peugeot Partner, no special tools are required. First, the seat backrests must be fully lowered forward by lowering …read all…
Posted on 13 June 2022 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos