Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : Cabin air filter

Peugeot Partner Tepee - Cabin air filter

Peugeot Partner Tepee (2008-2018 / B9)
How to change the cabin filter on Peugeot Expert
Let's see how to change the cabin air filter on the Peugeot Partner: contrary to what the youtuber says (and you can clearly see it in the video) the filter is …read all…
Posted on 19 December 2022 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Removing the Peugeot Partner cabin air filter
Do we want to replace the pollen filter of a Peugeot Partner? We open the door and remove the plastic covers to change the filter. Remove the protection placed …read all…
Posted on 20 January 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the cabin air filter on Peugeot Partner Tepee
The passenger compartment air filter of this model is located just behind the center console of the dashboard, in the lower part: to be able to replace it, it …read all…
Posted on 5 November 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Climate air filter replacement
An element not to be overlooked for your health is the filter for the recirculation of the conditioned air in your passenger compartment, do not be afraid it …read all…
Posted on 18 September 2023 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos