Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Filter on a Peugeot Partner MK2

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

This video shows how to change the cabin air filter on a Peugeot Partner MK2. The cabin filter is located in the footwell on the right side, so in this case, with the vehicle being left-hand drive, it is the passenger side. You need to remove a panel located on the left side, corresponding to the centre console, but below the glove compartment.

You will need a screwdriver to remove the screws holding the panel in place. Leveraging with the screwdriver, remove the three rivets that are at the base of the glove compartment from the bottom side.

Now you can remove the cover of the compartment that contains the filter: take it out of its housing, which we will clean of dust and debris. Place the new filter in its position, ensuring the correct orientation, close the compartment, reassemble the base of the glove compartment, and then the panel, securing it with its screws, and you are done.


Posted on 1 March 2026 by ScegliAuto


Related tutorials

Removing the Cabin Air Filter on a Peugeot Partner
Removing the Cabin Air Filter on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Do you want to replace the pollen filter on a Peugeot Partner? Open the door and remove the cover plastics to change the filter. Use a screwdriver to…
How to Replace the Air Filter on a Peugeot Partner?
How to Replace the Air Filter on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the air filter on a Peugeot Partner, open the bonnet to access the bolts securing the filter housing. This is located in the engine bay, c…
How to Replace the Cabin Filter on a Peugeot Partner 2020
How to Replace the Cabin Filter on a Peugeot Partner 2020
Peugeot Partner Tepee (2018-2026 / MK 3) In this video, you will see where the drawer containing the cabin air filter is located in the Peugeot Partner. In this case, it is a right-hand driv…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos