Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the air filter of the Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

In this video we can see how to change the air filter of a Peugeot Partner 2: we remove the engine cover, loosening the two closing rings, unlock the white plastic tab and remove the duct; unscrew the screws of the air flow meter connector and then disconnect the electrical connector; unlock the upper intake duct, and temporarily move the priming pump to free up space; remove the three torx screws on the filter flange and tilt it to the side to remove it. At this point we slide the filter out by sliding it to the right.

Clean the filter housing from dust and residue, and insert the new filter in its place.

Put the flange back in place and screw in the torx screws. Reconnect the upper duct and the air flow meter connector, put the closing rings back on the duct and also the priming pump and the engine cover.


Posted on 16 August 2025 by ScegliAuto


Related tutorials

Removing the Cabin Air Filter on a Peugeot Partner
Removing the Cabin Air Filter on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Do you want to replace the pollen filter on a Peugeot Partner? Open the door and remove the cover plastics to change the filter. Use a screwdriver to…
How to Replace the Air Filter on a Peugeot Partner
How to Replace the Air Filter on a Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) To replace the air filter on a Peugeot Partner, open the bonnet to access the components inside the engine bay. In the centre, just below the windscr…
How to Replace the Air Filter on a Peugeot Partner?
How to Replace the Air Filter on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the air filter on a Peugeot Partner, open the bonnet to access the bolts securing the filter housing. This is located in the engine bay, c…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos