Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter on a 2016 Peugeot Partner Tepee is a simple and quick operation. You need to: - open the front bonnet and cover the bodywork with a cloth; - remove the three screws on the filter cover using a Torx screwdriver size 13; - take off the cover; - remove the air filter; - insert the new filter; - reattach the box cover; - screw in the screws; - remove the cloth and close the engine bonnet; Once completed, get inside the vehicle and start the engine to verify that the replacement was successful.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Peugeot Partner Tepee
How to Replace the Air Filter on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Let’s see how to remove and replace the engine air filter on a Peugeot Partner Tepee: open the car door, pull up the lever to open the engine compart…
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…
How to replace the diesel filter of the Peugeot Partner Tepee 1.6 BlueHDI
How to replace the diesel filter of the Peugeot Partner Tepee 1.6 BlueHDI
Peugeot Partner Tepee (2008-2018 / B9) In this guide we will see the instructions that will allow us to disassemble and replace the diesel filter cartridge of the Peugeot Partner Tepee 1.6…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos