Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower area of the compartment beneath the glove box. Then, you will need to dislodge and remove the cover on the side of the centre tunnel.

Once the cover is removed, you can extract the cabin filter for replacement or cleaning. Remember to be careful during this procedure and consult the owner's manual for detailed instructions specific to your model of Peugeot Partner Tepee.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

Where is the Airbag Module on the Peugeot Partner Tepee?
Where is the Airbag Module on the Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) Disconnecting the airbag module of a vehicle means completely disabling the system. This operation is usually performed when removing the steering wh…
Removing the Cabin Air Filter on a Peugeot Partner
Removing the Cabin Air Filter on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Do you want to replace the pollen filter on a Peugeot Partner? Open the door and remove the cover plastics to change the filter. Use a screwdriver to…
Replacing the Gear Knob on the Peugeot Partner Tepee
Replacing the Gear Knob on the Peugeot Partner Tepee
Peugeot Partner Tepee (1996-2013 / MK 1) Below are the main steps to remove and replace the gear knob on the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, get inside the cab…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos