Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Airbag Module on the Peugeot Partner Tepee?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Airbag

See other generations:
Video tutorial

Disconnecting the airbag module of a vehicle means completely disabling the system. This operation is usually performed when removing the steering wheel or passenger side airbag due to a malfunction, allowing you to work with maximum safety.

On a Peugeot Partner Tepee, the airbag module is located inside the lower central dashboard, and to perform the previously explained operations, you need to unscrew the parts of the cup holder and glove compartment. Disconnect the module and render it inactive to proceed with the removal operations.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from the Peugeot Partner
How to Remove the Steering Wheel Airbag from the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) To remove the steering wheel airbag from the Peugeot Partner, you need to get inside the vehicle and rotate the steering wheel to a horizontal positi…
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…
Where is the Windscreen Wiper Fuse on the Peugeot Partner?
Where is the Windscreen Wiper Fuse on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The Peugeot Partner Tepee has two fuse boxes inside. The fuse for the windscreen wiper is located in the fuse box under the bonnet; when the wiper st…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos