|
Do it yourself
| |||
| ||||
How to remove the console of a Peugeot Partner/Citroen Berlingo
Model: Peugeot Partner Tepee
B9
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
The procedure described is identical for both Peugeot Partner and Citroen Berlingo: we start by removing the trim around the instrument cluster, then unscrew the two screws at the top (they are slightly recessed). We pull off the plastic trim that surrounds the instrument cluster, which is held only by clips. We pull it towards us to release it, without forcing. We remove the long ventilation grille at the top of the dashboard that points towards the windshield. It is held only by clips. Once the grille is removed, we will see two hex screws that we need to unscrew, after which we locate the two side screws near the air vents that may be covered by plastic caps. At this point, the console is held only by plastic clips that are mainly along the lower edge, near the center tunnel and on the sides. Once freed, we pull the console towards us to gain access to the various components. We disconnect the electrical connectors; radio, climate controls, power window switches, cigarette lighter sockets.
Posted on 22 January 2026 by ScegliAuto
Related tutorials
Peugeot Partner Tepee
(2008-2018 /
B9)
Today's instructions will show us the process of disassembling and replacing the clutch cable of the Peugeot Partner Tepee, as well as the Citroen Be…
Peugeot Partner Tepee
(2008-2018 /
B9)
In this guide, learn how to remove the radio from a Peugeot Partner or Citroen Berlingo: start by removing the detachable front panel by pressing the…
Peugeot Partner Tepee
(2008-2018 /
B9)
This guide shows you how to remove and replace the number plate bulb on the Peugeot Partner, as well as the Citroen Berlingo. First, open the tailgat…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
