Do it yourself
Frequently asked questions about cars and motorcycles

Coolant bleed valve position on Peugeot Partner (and Citroen Berlingo)

Model: Peugeot Partner Tepee MK 3 - Years 2018-2026
Part: Windshield

In this video, we can see where the coolant bleed valve of the Peugeot Partner (as well as the Citroen Berlingo) is located. This valve is used to eliminate air from the cooling system when filling or topping up the coolant, or after maintenance interventions on the system. In fact, in these cases, air bubbles may form inside the system, which can reduce the efficiency of the system. From this valve, we can release this air, ensuring good circulation of the fluid within the system. It is a small device with a screw cap, located at a strategic point in the system, and is located under the fitting that leads air to the filter.

Posted on 10 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Partner Tepee (2008-2018 / B9) First, remove the engine intake ducts by releasing the metal clips. At this point, disconnect the connector from the air filter and remove the entire…
Peugeot Partner Tepee (2008-2018 / B9) This guide provides instructions to reset the particulate filter (FAP) fluid warning light on a Peugeot Partner Tepee, as well as on a Citroen Berlin…
Peugeot Partner Tepee (2008-2018 / B9) In this video, we see how to remove the radio from the Peugeot Partner or Citroen Berlingo: we start by removing the removable front panel, which is …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos