Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Gear Oil Replacement on Peugeot Partner - Citroen Berlingo

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Transmission fluid

In this video, we will see how to replace the transmission oil on a Peugeot Partner, as well as on a Citroen Berlingo. First, lift the vehicle from the left side and remove the front left wheel by unscrewing the bolts; then unscrew the oil drain bolt from the gearbox and allow it to drain for about ten minutes, as shown in the video. At this point, replace the bolt and remove the oil filler cap from the gearbox, located next to the driveshaft; simply pour in the new oil and fill to the level indicated in the manual.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the clutch cable of the Peugeot Partner Tepee - Citroen Berlingo
Guide to replacing the clutch cable of the Peugeot Partner Tepee - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) .. of the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, we open the hood of the car and begin to disassemble and remove the battery,.. …
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Peugeot Partner Tepee (2008-2018 / B9) .. the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. First, open the engine bonnet and start by removing the engine mount, unscrewing the.. …
How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo
How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) .. light on a Peugeot Partner Tepee, as well as on a Citroen Berlingo (applicable to Euro 5 PSA group engines). First, get into the vehicle and connect your.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos