Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob on the Peugeot Partner Tepee

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Shift knob

See other generations:
Video tutorial

Below are the main steps to remove and replace the gear knob on the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, get inside the cabin and start by removing the gear gaiter found at the base; then pull the gear knob upwards with force to detach and remove it, as shown in the video.

At this point, replace the gear gaiter if necessary, installing the new knob; ensure there is no play between the gear knob and the lever!


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to remove the gear knob and gaiter on a Peugeot Partner Tepee
How to remove the gear knob and gaiter on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) This video tutorial will guide you through the steps to remove the gaiter and gear knob on a Peugeot Partner Tepee vehicle. To remove them yourself, …
How to Replace the Gear Knob on the Peugeot Partner
How to Replace the Gear Knob on the Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) Replacing the gear knob on a Peugeot Partner is a straightforward task you can do yourself. To carry out this operation, remove the lower part of the…
How to Replace the Gear Knob in the Peugeot Partner?
How to Replace the Gear Knob in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The method used to replace the gear knob of the Peugeot Partner, as shown in the video, is very simple and accessible to everyone. The task involves …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos