Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear knob and gaiter on a Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shifter boot

See other generations:
Video tutorial

This video tutorial will guide you through the steps to remove the gaiter and gear knob on a Peugeot Partner Tepee vehicle. To remove them yourself, first, unscrew the screws that secure the lower part of the gear lever, then use a flathead screwdriver or a plastic prying tool to remove the gear gaiter, as shown in the video.

Once the rigid part of the gaiter is removed, pull upwards to take off the knob and gaiter. Be careful not to damage the mechanism.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on the Peugeot Partner
How to Replace the Gear Knob on the Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) Replacing the gear knob on a Peugeot Partner is a straightforward task you can do yourself. To carry out this operation, remove the lower part of the…
Replacing the Gear Knob on the Peugeot Partner Tepee
Replacing the Gear Knob on the Peugeot Partner Tepee
Peugeot Partner Tepee (1996-2013 / MK 1) Below are the main steps to remove and replace the gear knob on the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, get inside the cab…
How to Remove the Gear Knob of a Peugeot Partner
How to Remove the Gear Knob of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Does removing the gear knob of a Peugeot Partner seem difficult? Follow these steps. Use a plastic lever to detach the leather gaiter frame; grasp th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos