Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob of a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Shift knob

Does removing the gear knob of a Peugeot Partner seem difficult? Follow these steps. Use a plastic lever to detach the leather gaiter frame; grasp the knob and rotate it left and right until it comes off the gear stick (cut the plastic tie if present). For reassembly: take the new knob and slide it onto the stick in the centre console, secure it onto the stick; install the new leather gaiter with the locking clips. Finally, test the movement of the stick in the centre console to ensure the knob is correctly fitted.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Gear Knob on the Peugeot Partner Tepee
Replacing the Gear Knob on the Peugeot Partner Tepee
Peugeot Partner Tepee (1996-2013 / MK 1) Below are the main steps to remove and replace the gear knob on the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, get inside the cab…
How to Replace the Gear Knob in the Peugeot Partner?
How to Replace the Gear Knob in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The method used to replace the gear knob of the Peugeot Partner, as shown in the video, is very simple and accessible to everyone. The task involves …
How to disassemble the knob and the gear lever boot of the Peugeot Partner
How to disassemble the knob and the gear lever boot of the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) In this guide we will see the instructions that will allow us to disassemble and replace the knob and the gear lever gaiter of the Peugeot Partner, b…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos