Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the knob and the gear lever boot of the Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shift knob

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the knob and the gear lever gaiter of the Peugeot Partner, but also of the Citroen Berlingo. First of all, we get on board the cabin and start removing the plastic cover of the gaiter that we find at the base; then we remove the clamp that we find between the gaiter and the knob, pulling the latter upwards to detach it and remove it, as shown in the video.

At this point, we first install the new gaiter and then the knob, fixing a clamp between the two components; finally, we reassemble the plastic cover!


Posted on 27 August 2025 by ScegliAuto


Related tutorials

How to remove the gear knob and gaiter on a Peugeot Partner Tepee
How to remove the gear knob and gaiter on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) This video tutorial will guide you through the steps to remove the gaiter and gear knob on a Peugeot Partner Tepee vehicle. To remove them yourself, …
Replacing the Gear Knob on the Peugeot Partner Tepee
Replacing the Gear Knob on the Peugeot Partner Tepee
Peugeot Partner Tepee (1996-2013 / MK 1) Below are the main steps to remove and replace the gear knob on the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, get inside the cab…
How to Replace the Gear Knob on the Peugeot Partner
How to Replace the Gear Knob on the Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) Replacing the gear knob on a Peugeot Partner is a straightforward task you can do yourself. To carry out this operation, remove the lower part of the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos