Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on Peugeot Partner and Citroen Berlingo

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Diesel fuel filter

First, remove the engine intake ducts by releasing the metal clips. At this point, disconnect the connector from the air filter and remove the entire compartment in which it is housed, as shown in the video. Now, the fuel filter is accessible: disconnect the connector here as well, then move on to the two small fuel lines. Release it from the retaining clip and extract the filter housing. Proceed in reverse for reassembly. As described in the title, the operation is the same for Citroen Berlingo and Peugeot Partner, as they are practically the same model branded by two different car manufacturers.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Diesel Filter on a Peugeot Partner
Replace the Diesel Filter on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Let's change the old diesel filter on a Peugeot Partner. Lift the front bonnet of the car and locate the diesel filter as shown in the video. Using a…
Location of the Fuel Filter on the Peugeot Partner MK3
Location of the Fuel Filter on the Peugeot Partner MK3
Peugeot Partner Tepee (2018-2026 / MK 3) This video shows the location of the diesel filter on the Peugeot Partner 2020/2022 and its twin, the Citroen Berlingo. On both vehicles, you need to…
How to Replace the Diesel Filter in a Peugeot Partner
How to Replace the Diesel Filter in a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) In today's video, see how to remove and replace the diesel filter in a Peugeot Partner. First, remember to work only with the engine cold to avoid bu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos