Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the fuel filter of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Fuel filter

The fuel filter of the Peugeot 308 prevents any dirt present in the tank from reaching the injection system and causing damage, but we must replace it periodically to ensure efficiency. To do this, we position ourselves near the rear passenger seat on the right side, remove the seat cushion, remove the section of trim and the round cover underneath. This gives us access to the filter, disconnect the pipes connected to it by acting on the fittings, remove the old filter and replace it with a new one, put the fuel pipes back in place, secure the filter body in position. Reassemble the cover, trim and seat.

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) Today we will discover the instructions that will allow us to remove and replace the diesel filter on the Peugeot 308 1.6 e-HDi. First, open the vehi…
Peugeot 308 (2007-2014 / T7, MK 1) In today's tutorial, we will see how to disassemble and replace the diesel filter on the first series Peugeot 308 in simple and quick steps. First, a…
Peugeot 308 (2013-2021 / T9, MK 2) To replace the diesel filter on a Peugeot 308 1.6 HDi, open the bonnet and locate the filter, which is directly under the windscreen in the centre. O…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos