Do it yourself
Frequently asked questions about cars and motorcycles

Where is the fuel filter located in the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Fuel filter

In this video we can see where the fuel filter is located in the Peugeot 207 and how to proceed in case we need to replace it, an extremely simple and quick operation. As shown, the filter in question is located in the lower area of the vehicle, right in front of the left rear wheel. To replace it, it will be sufficient to go under the car, taking the necessary safety measures, disconnect the two tubes by unlocking the respective clips and release it from the plastic support. To install the replacement, simply follow the reverse procedure.

Posted on 12 December 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Peugeot 207 (2006-2015 / MK 1) Before you begin, open the bonnet of your Peugeot 207. The diesel filter is located near the left side of the air filter. Start by disconnecting the …
Peugeot 207 (2006-2015 / MK 1) Lift the bonnet; remove the soundproofing panel from the engine and locate the diesel filter (as shown in the video). Using a socket wrench, unscrew …
Peugeot 207 (2006-2015 / MK 1) Discover in this video how to remove and replace the diesel filter on the Peugeot 207 1.6 HDI, as well as on the 1.4 HDI and all other models from th…

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - Where is the petrol filter on the Peugeot 207? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos