Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Fuel filter

Replacing the fuel filter on a Peugeot 207 is an extremely simple and quick task. Open the bonnet first, then locate the valve on the right side of the engine and press it slightly to release some pressure. Next, move to the left rear wheel arch, locate the filter, and disconnect the two fuel pipes by unfastening the respective metal clips. To remove the filter from its mount, simply pull it outwards with force, and follow the reverse procedure to install the new part.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the sunroof of the Peugeot 207 cc?
How do you reset the sunroof of the Peugeot 207 cc?
Peugeot 207 (2006-2015 / MK 1) The convertible version of the Peugeot 207, namely the Peugeot 207 cc, could suddenly show electrical problems with the opening of the roof, which ca…
Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …
Where is the OBD2 port located on the Peugeot 207?
Where is the OBD2 port located on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To find the OBD2 port inside your Peugeot 207, all you have to do is carefully read and follow the steps described below. First, open the driver's si…

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - Where is the petrol filter on the Peugeot 207? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos