Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the diesel filter of the Peugeot 308?

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Diesel fuel filter

In order to replace the diesel fuel filter of the Peugeot 308, you need to open the hood so that you can access the components located inside the engine compartment: on the part immediately to the left of the engine block, you will find the diesel fuel filter. You will need to disconnect the tubes for the fuel passage, then loosen the screws that secure the filter to its seat: now you can remove it completely in order to insert the new one. After installation, you will need to verify that everything is functioning properly.

Posted on 17 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Peugeot 308 1.6 HDi
How to Replace the Diesel Filter on a Peugeot 308 1.6 HDi
Peugeot 308 (2013-2021 / T9, MK 2) To replace the diesel filter on a Peugeot 308 1.6 HDi, open the bonnet and locate the filter, which is directly under the windscreen in the centre. O…
How to Change the Diesel Filter on the Peugeot 308 II
How to Change the Diesel Filter on the Peugeot 308 II
Peugeot 308 (2013-2021 / T9, MK 2) In this video, we can see how to change the diesel filter on the Peugeot 308: lift the rear of the vehicle and remove the protection located behind t…
How to Replace the Diesel Filter in a Peugeot 308
How to Replace the Diesel Filter in a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To replace the diesel filter in a Peugeot 308, first open the engine bay and secure the bonnet with the prop rod. Next, as shown, remove the air inta…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos