Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Diesel Filter on the Peugeot 308 II

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Diesel fuel filter

In this video, we can see how to change the diesel filter on the Peugeot 308: lift the rear of the vehicle and remove the protection located behind the left rear wheel, which protects the diesel filter. Place a container underneath to collect the diesel that will inevitably spill when changing the component. Once the cover is removed and the fuel has drained, take off the seal and then the filter. Clean the cap and then replace both the seal, lubricating it with diesel, and the filter. Put everything back in place, then reattach the plastic protection. Lower the vehicle back to the ground and you're done.

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the diesel filter of the Peugeot 308?
How do you replace the diesel filter of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In order to replace the diesel fuel filter of the Peugeot 308, you need to open the hood so that you can access the components located inside the eng…
How to Replace the Diesel Filter on a Peugeot 308 1.6 HDi
How to Replace the Diesel Filter on a Peugeot 308 1.6 HDi
Peugeot 308 (2013-2021 / T9, MK 2) To replace the diesel filter on a Peugeot 308 1.6 HDi, open the bonnet and locate the filter, which is directly under the windscreen in the centre. O…
How to Change the Diesel Filter on the Peugeot 308 MK1
How to Change the Diesel Filter on the Peugeot 308 MK1
Peugeot 308 (2007-2014 / T7, MK 1) In today's tutorial, we will see how to disassemble and replace the diesel filter on the first series Peugeot 308 in simple and quick steps. First, a…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos