Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to change the diesel filter on Peugeot 308 MK1

Peugeot 308 - Video tutorial

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Diesel filter
Operation: How to change the diesel filter on Peugeot 308 MK1

In today's video tutorial we will see how to remove and replace the diesel filter on the Peugeot 308 first series, in simple and quick steps. First of all we access the back of our car and remove the sofa; we find below the floating diesel pump, together with the fuel filter. At this point we disconnect the fuel pipes that reach the pump and remove the latter, as shown in the video; let the excess diesel oil drain and replace the pump with the new one, of the right type, applying the reverse procedure for reassembly!


Posted on 26 February 2024 by ScegliAuto



Replacement of the diesel filter of the Peugeot 308 - 3008 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In today's video tutorial we will see how to remove and replace the diesel filter of the Peugeot 308 1.6 HDI, but also of the 3008, 207 and 208. Firs
How to replace the diesel filter in the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In this tutorial we can see how to replace the diesel filter in the Peugeot 308, a very simple and fast operation. First of all, let's make sure that
How to replace the diesel fuel filter of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / MK 2, T9) These short and simple instructions will show us how to dismantle and replace the diesel fuel filter cartridge of the Peugeot 308 1.6 HDI. First of a

    Frequently Asked Questions

    • 308 2007-2014 - Where is the Peugeot 308 diesel filter located? Read Answer
    • 308 2007-2014 - Where is the Peugeot 308 diesel filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos