Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to change the fuel pump on Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 1, T7 - Years 2007-2014
Part: Fuel pump
Operation: How to change the fuel pump on Peugeot 308

Remove the fuel pump on a Peugeot 308? We disassemble the rear seats to access the fuel pump container compartment. With a socket wrench, unscrew the tightening screws of the metal cap (if any), remove it from its seat, cover the perimeter with absorbent paper to stop liquid leaks. We disconnect the power supply terminals and the liquid circulation pipes, extract the fuel pump from its seat with attached pieces. We mount the new fuel pump inside the car tank, we mount all the pieces attached to the piece. We test the operation at the end of the assembly.


Posted on 24 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 308 2007-2014 - How do you replace the fuel pump in the Peugeot 308? Read Answer
    • 308 2013-2021 - How do you replace the fuel pump in a Peugeot 308? Read Answer
    • 308 2013-2021 - How much does it cost to replace a Peugeot 308 fuel pump? Read Answer
    • 308 2013-2021 - How much does the Peugeot 308 AdBlue pump cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos